We're Open & Here For You! Important Coronavirus Information - Click Here to Learn More

Reasons Why Your Circuit Breaker Is Constantly Tripping and What to Do About It

The electrical circuit breaker inside any building is an important component that can be activated both manually and automatically. This is for protecting and controlling all of the electrical fixtures inside your home or office.

Circuit breakers are usually there to prevent the flow of any excess loads to the electrical component that you have them positioned for. The inability of a circuit breaker to function properly can put your expensive electrical components under undue risk and might even blow away the circuit component present within all of them.

House fires, which were common stock back in the day, have vehemently been prevented due to the presence of circuit breakers inside the home. Circuit breakers regulate the flow of electricity and ensure that there is no impact of excess load on your home, or on your circuits.

It is important to note here that circuit breakers should regularly be checked on by an electrician in Myrtle Beach, SC. The electrician you have for the job would inspect the circuit breaker and give you an estimate of what is required by you to keep intact the integrity of the circuit breaker.

Reasons Why Circuit Breakers Trip

Having worked with home electrical issues since ages, we now have the requisite experienced required for telling what causes circuit breakers to trip.

Here we mention 3 of these reasons, gathered from certified electrician in Myrtle Beach, SC. These electricians in Myrtle Beach, SC have worked on numerous homes within the area, and have outlined these reasons as the most common occurrences.

Circuit Overloads

Circuit overload is one of the most common reasons behind the tripping of a circuit breaker. A circuit overload usually occurs when the particular circuit that you have placed in your home is used for providing more electricity than what it is actually able of. The consistence overload on the circuit would put the breaker and the connected appliances under undue stress, and eventually lead to a circuit breaker tripping.

If the television you have in your home is connected to a circuit that needs 15 amps, the electrical consumption should best be below that figure. If the electrical output flowing through that circuit exceeds the 15 Amps limit, then the circuit breaker will trip under the pressure.

You can tell that the circuit breaker has done its job when it trips. The job of the breaker is to stop a fire from breaking out, and to prevent damage. Electricians in Myrtle Beach, SC recognize that circuit breakers can be potential game changers in stopping a fire from causing massive damage inside a home.

Short Circuits

Another reason that leads to the tripping of a circuit breaker, as outlined by electrician in Myrtle Beach, SC, is a short circuit. Short circuits can be potentially more damaging and risky than an overloaded circuit that we talked about above.

A short circuit usually happens when a large flow of current flows through the circuit, because a hot wire in one of your electrical outlets has come in contact with a neutral wire. This usually ends up creating a lot more heat than what your circuit and your circuit breaker are capable of handling.

The breaker will immediately trip when this happens, saving both your home and the circuit from further damage. Short circuits are usually the doing of loose connections and faulty wiring, which is why it is recommended that you get your wiring inspected from an electrician in Myrtle Beach, SC on a periodic basis.

Ground Fault Surges

Ground fault surges resemble short circuits in detail, with only a few disparities in the way they happen. Ground fault surges usually happen when a hot wire in your home comes in contact with a ground wire.

These short circuits occur when a hot wire within your electrical outlets comes in contact with a ground wire, which is usually made out of bare copper.

This contact will usually result in a greater flow of electricity to pass through the circuit, which the circuit would not be able to handle. The circuit breaker will immediately recognize the flow of electricity and trip to save your appliances from overheating and to stop the hazards of a potential fire.

All electricians in Myrtle Beach, SC agree that circuit breakers are a good addition to your home’s electrical system. However, it is best that you have tripping circuit breakers inspected by an electrician in Myrtle Beach, SC to find out the reason behind the occurrence. There is always something that causes a circuit breaker to trip, and it is in your best interest to find that cause out.

What to Do When a Circuit Breaker is Constantly Tripping

Most homeowners often suffer from a circuit breaker that is constantly tripping. The answer to fixing this issue lies in getting the services of an electrician in Myrtle Beach, SC. The electrician would come and take everything into consideration, before giving you a pertinent solution for the matter.

They would make sure that all factors are considered and that they can get to the root cause of the matter to find a pertinent solution. Only a professional electrician in Myrtle Beach, SC can get such a job done, as they have the required experience in the field, and have worked on multiple cases of such magnitude before.

We, at Mister Sparky® of Myrtle Beach have an expert team that provides professional services. Our electricians in Myrtle Beach, SC handle all electrical repairs and make sure that you don’t get hurt and your electricity problems are addressed effectively and with caution. You can contact us here or give us a call at (843) 508-9631 and get a free estimate.