What fire safety precautions can I take to protect my home?
One of the most overlooked safety devices in your home is a smoke detector. There are two basic types of smoke detector system: one that has smoke detector wiring that issues a signal to a monitored fire alarm system; or smoke alarms, which issue a local audible and/or visual alarm from the detector itself.
Most smoke detectors work either by optical detection (photoelectric) or by physical process (ionization), while others use both detection methods to increase sensitivity to smoke. Smoke detector wiring can be powered by a central fire alarm system, which uses a battery backup. However, single family detached and multi-family homes often use the type of smoke alarm powered by a single disposable battery.
Installation and placement
In the United States, most state and local laws regarding the required number and placement of smoke detectors are based upon standards established in the National Fire Prevention Association (NFPA 72) fire code. Laws governing the installation of smoke detectors vary from jurisdiction to jurisdiction. The U.S. requires smoke detectors on every habitable level and in attics that are accessible, and within the vicinity of all bedrooms. In Canada, it is required that a structure have a working smoke detector on every level.
In new construction, minimum requirements are typically more stringent. All smoke detector wiring must be hooked directly to the electrical wiring system, be interconnected and have a battery backup. Some jurisdictions also require smoke detectors in stairways, main hallways and garages.
Wired units allow a dozen or more detectors to be connected, so that if one detects smoke, the alarms will sound on all the detectors in the network. This improves the chances that occupants will be alerted, even if they are behind closed doors or if the alarm is triggered one or two floors removed from their location. Smoke detector wiring with interconnections may only be practical for use in new construction, especially if the wire needs to be routed in areas that are inaccessible without cutting open walls and ceilings.
Most residential smoke detectors run on 9-volt alkaline or carbon-zinc batteries. When these batteries run down, the smoke detector becomes inactive. When the battery is low, most smoke detectors will signal with a chirping sound at regular intervals. In regions that observe daylight saving time, public awareness campaigns suggest changing the smoke detector batteries when they change their clocks.
Contact your local Mister Sparky® technician for assistance if you have questions or concerns about smoke detector placement, installation or repair. Local fire marshals and municipal building inspectors can also provide information on proper usage and placement.
Serving: Amo, Arcadia, Atlanta, Avon, Bargersville, Beech Grove, Boggstown, Brooklyn, Brownsburg, Camby, Carmel, Charlottesville, Cicero, Clayton, Coatesville, Danville, Edinburgh, Fairland, Finly, Fishers, Fortville, Fountaintown, Franklin, Greenfield, Greenwood, Indianapolis, Ingalls, Jamestown, Lapel, Lebanon, Lizton, Markleville, Martinsville, McCordsville, Monrovia, Mooresville, Morgantown, Morristown, Needham, New Palestine, Nineveh, Noblesville, North Salem, Paragon, Pendleton, Pittsboro, Plainfield, Shelbyville, Sheridan, Stilesville, Trafalgar, Westfield, Whiteland, Whitestown, Wilkinson and Zionsville, Indiana.
A family of home services:
Strong partnerships and a national support system.
Independently owned and operated.